Hi all,
I'm new to Allen Bradley programming but have done a bit with Siemens. I was hoping someone could give some direction on the following:
I am trying to set up RS Emulate. In the RSLogix Emulate chassis monitor the first available slot is 1 as RSLinx is in slot 0. And "Emulator RSLogix Emulate 5000 Controller" setup in slot 1.
My PLC is a 1769-L32E w/ (2xIQ32A, 1xOB32A, 1xOB16B, 1xIF4B, 1xOF4CIA) the CPU slot is 0, so when i try to connect to the virtual chassis is fails with error incorrect controller slot number.
What do I do as I cannot change either slot number?
Also do I need to set up IO modules on the Virtual Chassis in order to get no errors during download?
I have tried setting up another test program with controller "Emulator RSLogix Emulate 5000 Controller" and transferring all tags, routines and data types, but this seems unnecessary plus local IO doesn't match afterward.
Hopefully I have not omitted any crucial info.
Any guidance would be much appreciated.
Thanks,
DC
I'm new to Allen Bradley programming but have done a bit with Siemens. I was hoping someone could give some direction on the following:
I am trying to set up RS Emulate. In the RSLogix Emulate chassis monitor the first available slot is 1 as RSLinx is in slot 0. And "Emulator RSLogix Emulate 5000 Controller" setup in slot 1.
My PLC is a 1769-L32E w/ (2xIQ32A, 1xOB32A, 1xOB16B, 1xIF4B, 1xOF4CIA) the CPU slot is 0, so when i try to connect to the virtual chassis is fails with error incorrect controller slot number.
What do I do as I cannot change either slot number?
Also do I need to set up IO modules on the Virtual Chassis in order to get no errors during download?
I have tried setting up another test program with controller "Emulator RSLogix Emulate 5000 Controller" and transferring all tags, routines and data types, but this seems unnecessary plus local IO doesn't match afterward.
Hopefully I have not omitted any crucial info.
Any guidance would be much appreciated.
Thanks,
DC