I want to create a UDT that contains an array of 4 DINTs. Can I give the DINTs names they will show up with instead of .0 or .1 etc? And then can I give the BOOL members of each DINT a description?
So for example if my array is named
SMV_Output_Assembly_100
then word 0 of that array would be named
Control_Word
and bit 0 of Control_Word would just be .0 in the expanded tag list but it would have a comment that reads "0=not run forward; 1=run forward"
So for example if my array is named
SMV_Output_Assembly_100
then word 0 of that array would be named
Control_Word
and bit 0 of Control_Word would just be .0 in the expanded tag list but it would have a comment that reads "0=not run forward; 1=run forward"