madhupraba
Member
I am working in the following system and i am having the problem mentioned below please help me and solution.
System:
Allen Bradly-PLC-5 ControlNet processor(1785-L80C15).Two main processors housed in seperate I/O racks and redundant (Primary and Backup processor unit)are connected through a controlnet network and RSLOGIX5 cotrol program is used for sequence and interlocking the Lignit handling system in N.L.C.Ltd, neyveli,INDIA.
Problem:RSLOGIX5 SOFTWARE
The problem is When i am forcing the input signal in the Input table for starting the conveyor in the primary processor(node 1), The same is not updating(hotbackup) in the secondary processor(node-2). So i have to manualy do forcing in the secondary processor. Please guide me how to update forces in secondary processor automaticaly.
System:
Allen Bradly-PLC-5 ControlNet processor(1785-L80C15).Two main processors housed in seperate I/O racks and redundant (Primary and Backup processor unit)are connected through a controlnet network and RSLOGIX5 cotrol program is used for sequence and interlocking the Lignit handling system in N.L.C.Ltd, neyveli,INDIA.
Problem:RSLOGIX5 SOFTWARE
The problem is When i am forcing the input signal in the Input table for starting the conveyor in the primary processor(node 1), The same is not updating(hotbackup) in the secondary processor(node-2). So i have to manualy do forcing in the secondary processor. Please guide me how to update forces in secondary processor automaticaly.