Deer
Member
- Join Date
- Jun 2002
- Posts
- 124
Hi Friends,
I have 3 (three) Mitshubisi PLC that connected as one network and right now I don't have HMI for monitoring these process.
I would like to use RSView32 from Rockwell Software as HMI to monitoring these system.
RSView 32 will be install at 1 (one) Computer and this computer will be connected to these 3 (three) Mitshubisi PLC.
My problem, they have different protocol.
As I knew Mitshubisi (A series/Melsec) use MELSECNET II as their network (coaxial cable).
My question, anybody knows a solution or driver or software as a gateway so RSView can communicate with Mitshubisi PLC ?
Your suggestion would be appreciated
Thanks in advanced.
Deer
I have 3 (three) Mitshubisi PLC that connected as one network and right now I don't have HMI for monitoring these process.
I would like to use RSView32 from Rockwell Software as HMI to monitoring these system.
RSView 32 will be install at 1 (one) Computer and this computer will be connected to these 3 (three) Mitshubisi PLC.
My problem, they have different protocol.
As I knew Mitshubisi (A series/Melsec) use MELSECNET II as their network (coaxial cable).
My question, anybody knows a solution or driver or software as a gateway so RSView can communicate with Mitshubisi PLC ?
Your suggestion would be appreciated
Thanks in advanced.
Deer