ansariobaid
Member
Dear Experts,
I am new to the GE Fanuc systems, I need some guidance in communication between RX3i PAC system (CPU CRU 320)and Versamax CPUE05 over Modbus RTU.
IC200CMM020 is connected as a Profinet Drop to the RX3i System through Profinet Scanner (PNS001). I would like to establish the Modbus RTU communication with the Versamax CPUE05 using port2- RS485.
I have gone through the Manual GFK 2423E and made the PLC Program as per the manual.Program description provided in the manual not helping me to understand the logic completely.
Please find the enclosed RX3i PLC Backup.
Can somebody please help me out to configure the IC200CMM020 for Modbus RTU Master?
Is there any sample program/ descriptive manual available for the same?
I will be grateful for your kind support.
I am new to the GE Fanuc systems, I need some guidance in communication between RX3i PAC system (CPU CRU 320)and Versamax CPUE05 over Modbus RTU.
IC200CMM020 is connected as a Profinet Drop to the RX3i System through Profinet Scanner (PNS001). I would like to establish the Modbus RTU communication with the Versamax CPUE05 using port2- RS485.
I have gone through the Manual GFK 2423E and made the PLC Program as per the manual.Program description provided in the manual not helping me to understand the logic completely.
Please find the enclosed RX3i PLC Backup.
Can somebody please help me out to configure the IC200CMM020 for Modbus RTU Master?
Is there any sample program/ descriptive manual available for the same?
I will be grateful for your kind support.