plumbo
Member
We are trying to configure redundant RX3I system with profinet ring (MRP). We have two PNS racks.
We were able to set the device names for the PNS's.
The issue is one of the scanner racks becomes inactive when the secondary is the active controller. The other rack looks to remain connected.
We updated firmware for the PNCs. Loaded the GSDML for the PNS's. At a loss, we're waiting for GE support but..doesn't seem like they have much experience with these cards.
Any leads would be much appreciated.
We were able to set the device names for the PNS's.
The issue is one of the scanner racks becomes inactive when the secondary is the active controller. The other rack looks to remain connected.
We updated firmware for the PNCs. Loaded the GSDML for the PNS's. At a loss, we're waiting for GE support but..doesn't seem like they have much experience with these cards.
Any leads would be much appreciated.