altafjamadar
Member
we need to comunicate S5 plc to pc(lap top) but we dont have RS232 comunication port . is it posible with USB to Serial converter ???.
thanking you.
Jamadar.
thanking you.
Jamadar.
S5 plc conunication problem
- Thread starter altafjamadar
- Start date
KalleOlsen
Member
Check this link:
http://www.ibhsoftec-sps.de/english/Selection_Hardware_S5.htm
And OPC server:
http://www.ibhsoftec-sps.de/english/OPCServer.htm
http://www.ibhsoftec-sps.de/english/Selection_Hardware_S5.htm
And OPC server:
http://www.ibhsoftec-sps.de/english/OPCServer.htm
Similar Topics
HI everyone,
i am new to Siemens plc programming and i am in need of some help.
yesterday we had an S7-1200 CPU 1214C fail to turn on an output to...
Hello,
I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer.
I'm using GXWorks 2 to do the programming and I have no problem...
Hi,
I'm trying to import a Rockwell/AB EDS to Beckhoff but I'm not sure how to import/install the EDS. It is a PowerFlex 525 EDS. Is there a way...
I want to communicate my Q series PLC with Factory IO using GX works 2 software, I want to use modbus as server and the ips are as follows
plc...
Hi everyone.
I'm trying to read values from a Loadcell with a 2080-TC card.
I know the 2080-TC is a thermocouple card but it reads millivolts that...