timodc
Member
Like lots of other people I ran into a couple of problems while converting S5 to S7 with the 'SIMATIC S5 converting Tool'. Mainly the problem is the commands from S5 that cannot be converted to S7.
In the S5 converting tool there is the possibelity to insert MACRO's to simulate the S5 commands in S7.
Is there anyone that tried to make these MACRO's? For example, how can I implend this piece of S5 in S7:
T DBW 8;
L DBB 9;
+ L#977920;
LIR 1;
SLD 4;
L MW 214;
+D;
MAB
LRW +0;
L MW 240
OW;
T MW 240
LRW +1;
L MW 242
OW;
T MW 242
LRW +2;
L MW 244
OW;
T MW 244
LRW +3;
L MW 246
OW;
My main concern are the commands LIR, MAB and LRW (Also TIR is a problem, but not in this part)
friendly greetings,
Timo
In the S5 converting tool there is the possibelity to insert MACRO's to simulate the S5 commands in S7.
Is there anyone that tried to make these MACRO's? For example, how can I implend this piece of S5 in S7:
T DBW 8;
L DBB 9;
+ L#977920;
LIR 1;
SLD 4;
L MW 214;
+D;
MAB
LRW +0;
L MW 240
OW;
T MW 240
LRW +1;
L MW 242
OW;
T MW 242
LRW +2;
L MW 244
OW;
T MW 244
LRW +3;
L MW 246
OW;
My main concern are the commands LIR, MAB and LRW (Also TIR is a problem, but not in this part)
friendly greetings,
Timo