Ger_gnu
Member
Hi:
I tell them we have a s7 300 with connexion MPI
We need ethernet connexion
So I buy CP 343-1.
The problem is w#16#3FC.No matter the location in the rack. As if to check the modules
FB76
//Get status of the module on the place 10 (analog input, dummy module or empty)
M09L: U DIX [AR1,P#1.2]
O(
L #DATEN[77] //Actual module typ
L W#16#8FC0 //Identification for a dummy module
==I
)
O(
POP
L W#16#C0 //Identification_1 for empty place
==I
)
//V1.3
O(
POP
L W#16#0 //Identification_2 for empty place
==I
)
SPB M0AL //Module rack 0 place 10 parameter has been Loaded
L #DATEN[76] //Nominal module typ
L #DATEN[77] //Actual module typ
==I
SPBN WMTP //Wrong Module Typ on the Place
L W#16#A //Load modul place number
T #t_MODUL_PLACE
L B#16#54 //IOID-Number of the input module
T #t_P_IOID
L 280 //Basicaddresse of the module
T #t_P_LADDR
L B#16#AA //Filter time for input module (50Hz)
T #P_DATABASE.CHANNEL_CONFIG
SPA LDAT
M0AL: NOP 0
Best regards.
Germán.
I tell them we have a s7 300 with connexion MPI
We need ethernet connexion
So I buy CP 343-1.
The problem is w#16#3FC.No matter the location in the rack. As if to check the modules
FB76
//Get status of the module on the place 10 (analog input, dummy module or empty)
M09L: U DIX [AR1,P#1.2]
O(
L #DATEN[77] //Actual module typ
L W#16#8FC0 //Identification for a dummy module
==I
)
O(
POP
L W#16#C0 //Identification_1 for empty place
==I
)
//V1.3
O(
POP
L W#16#0 //Identification_2 for empty place
==I
)
SPB M0AL //Module rack 0 place 10 parameter has been Loaded
L #DATEN[76] //Nominal module typ
L #DATEN[77] //Actual module typ
==I
SPBN WMTP //Wrong Module Typ on the Place
L W#16#A //Load modul place number
T #t_MODUL_PLACE
L B#16#54 //IOID-Number of the input module
T #t_P_IOID
L 280 //Basicaddresse of the module
T #t_P_LADDR
L B#16#AA //Filter time for input module (50Hz)
T #P_DATABASE.CHANNEL_CONFIG
SPA LDAT
M0AL: NOP 0
Best regards.
Germán.