mulderm
Member
Hello,
I have a CPU 315-2dp plc using for profibus communication with the SEW Movidrive MDX61B inverter.
In the hardware configuration I have fill in the adresses for
communication Input: 264 and Output 264.
When I program example L 1500 T POW 266 in a network and I
download this to the plc the plc are going in stop!
By the diagnostics I see I/O access error.
But I don't know what the fault is.
Profibus communication is working good (led is of on the DFP21B).
Any idea?
Greetings,
mulderm
I have a CPU 315-2dp plc using for profibus communication with the SEW Movidrive MDX61B inverter.
In the hardware configuration I have fill in the adresses for
communication Input: 264 and Output 264.
When I program example L 1500 T POW 266 in a network and I
download this to the plc the plc are going in stop!
By the diagnostics I see I/O access error.
But I don't know what the fault is.
Profibus communication is working good (led is of on the DFP21B).
Any idea?
Greetings,
mulderm