Lilapauser
Member
- Join Date
- May 2005
- Posts
- 6
Hello!
I try to send a Data Block full of measurements to my PC via the Internet. The PLC is connected via Ethernet-to-GPRS modem. That means, that the PLC has to SEND the Data Block via TCP/IP (polling from PC is no option).
But how can I do that?? The result should be a table with the measurements on my PC (even better: stored via WinCC)
Thank you! - Jan
Hardware:
S7-313C with CP343-1
PC with normal Ethernet-Card and WinCC 6.0 Demo
I try to send a Data Block full of measurements to my PC via the Internet. The PLC is connected via Ethernet-to-GPRS modem. That means, that the PLC has to SEND the Data Block via TCP/IP (polling from PC is no option).
But how can I do that?? The result should be a table with the measurements on my PC (even better: stored via WinCC)
Thank you! - Jan
Hardware:
S7-313C with CP343-1
PC with normal Ethernet-Card and WinCC 6.0 Demo