swedeleaner
Member
Hey guys!
Newbie here, have some experience in both S7 Classic and TIA V13, but would really like your opinions/help on a solution.
Hardware/Software Used:
S7-1215C
TP700 Comfort
TIA Portal V13 SP1 Upgrade 4
After hours of googling I found some hints, but nothing seemed like a complete solution.
I need two separate logs in CSV-format. I want to log each time a measurement is finished, so no timed events or button controlled triggers.
These logs are created and stored in the HMI, and will be reachable from the web-server,
I have two PLC-tags that would be suitable for triggers.
Is this possible using the Historical data -> Data log? I just cant find how to use bit triggered logging?
Several hints pointed at the system command "LogTag", but i just cant understand it should be used?
The only "Events" available for the data logs is "Overflow", and i guess this is an event used for when the log is full?
Or is the built in Data log function not suitable for this type of logging, do I need to use a script instead?
It seems like a quite simple function, but i´m having a really hard time configuring it.
Help is very appreciated!
Newbie here, have some experience in both S7 Classic and TIA V13, but would really like your opinions/help on a solution.
Hardware/Software Used:
S7-1215C
TP700 Comfort
TIA Portal V13 SP1 Upgrade 4
After hours of googling I found some hints, but nothing seemed like a complete solution.
I need two separate logs in CSV-format. I want to log each time a measurement is finished, so no timed events or button controlled triggers.
These logs are created and stored in the HMI, and will be reachable from the web-server,
I have two PLC-tags that would be suitable for triggers.
Is this possible using the Historical data -> Data log? I just cant find how to use bit triggered logging?
Several hints pointed at the system command "LogTag", but i just cant understand it should be used?
The only "Events" available for the data logs is "Overflow", and i guess this is an event used for when the log is full?
Or is the built in Data log function not suitable for this type of logging, do I need to use a script instead?
It seems like a quite simple function, but i´m having a really hard time configuring it.
Help is very appreciated!