Hi all,
TL;DR - what structure does an input/output address from an STB RIO rack have in Schneider programming software?
I'm designing a control panel for a customer who wants me to use Schneider Advantys STB remote I/O. I've never used it before, and I don't know what type of PLC they're connecting it to, but the programming is in their scope so that's not really a big drama.
However, I like to get all the little details right as much as possible, and one of those details is to describe on each page of the schematics what range of I/O addresses is represented. I've downloaded and installed the Schneider Advantys Builder software and constructed the rack, so I know which module has which range of addresses - but what I don't know is how those addresses are then represented in the PLC. For example, if I use a Logix controller, the address structure is along the lines of:
Which might look like:
Can anyone give me an example of what this might look like in a Schneider PLC? If anyone can share a screenshot of an input/output data address from an STB remote I/O rack in the relevant software, that'd be a huge help.
TL;DR - what structure does an input/output address from an STB RIO rack have in Schneider programming software?
I'm designing a control panel for a customer who wants me to use Schneider Advantys STB remote I/O. I've never used it before, and I don't know what type of PLC they're connecting it to, but the programming is in their scope so that's not really a big drama.
However, I like to get all the little details right as much as possible, and one of those details is to describe on each page of the schematics what range of I/O addresses is represented. I've downloaded and installed the Schneider Advantys Builder software and constructed the rack, so I know which module has which range of addresses - but what I don't know is how those addresses are then represented in the PLC. For example, if I use a Logix controller, the address structure is along the lines of:
Code:
Chassis:Slot.Type.Data.Point
Code:
RIO1:03.I.Data.4