Hello Dear friends
I have a DRESSER_RAND generator. A part of the control is taken over by a SCHNEIDER M340 PLC.
The system components are as the following
1- power supply CPS201
2- CPU P3420302
3-DDI6402K
4-DDO6402K
5- AMI0800
6-AMO0410
7-DDI3202K
8-AMI0800
9 AMO0410 BMXAMO0410 PV:01 ,SV:10
I need to order spare parts because we don't have any.
Is there any version considerations?
I could only see the extra information for the last card because I cannot stop the generator to take out the other cards.
Is the information about the other cards enough or different versions can make problems.
I don't have unity PRO software. If I order to purchase it can I retrieve the information about the module including the firmware versions. For some other types of PLC I know I can but I don't know about SCHNEIDER.
Could the program be locked out by DRESSER_RAND so I cannot retrieve or modify anything.
Thank you
I have a DRESSER_RAND generator. A part of the control is taken over by a SCHNEIDER M340 PLC.
The system components are as the following
1- power supply CPS201
2- CPU P3420302
3-DDI6402K
4-DDO6402K
5- AMI0800
6-AMO0410
7-DDI3202K
8-AMI0800
9 AMO0410 BMXAMO0410 PV:01 ,SV:10
I need to order spare parts because we don't have any.
Is there any version considerations?
I could only see the extra information for the last card because I cannot stop the generator to take out the other cards.
Is the information about the other cards enough or different versions can make problems.
I don't have unity PRO software. If I order to purchase it can I retrieve the information about the module including the firmware versions. For some other types of PLC I know I can but I don't know about SCHNEIDER.
Could the program be locked out by DRESSER_RAND so I cannot retrieve or modify anything.
Thank you