Using RSLogix 5000 and have an A/B PLC 1769-L32E Controller.
I have a EDI ED202-ETH-4D-N1 display.
Just want to create a simple counter that will count down from 10
and then reset. Trying to send commands over Ethernet to the display
but I am a little rusty with my PLC and RSLogix 5000. The display uses ASCii commands to set the display.
All help is greatly appreciated
I have a EDI ED202-ETH-4D-N1 display.
Just want to create a simple counter that will count down from 10
and then reset. Trying to send commands over Ethernet to the display
but I am a little rusty with my PLC and RSLogix 5000. The display uses ASCii commands to set the display.
All help is greatly appreciated