I’m working with A-B SLC-5/02 processor. I’m trying to set up a SQO function. The following is how I have the Sequencer setup:
File #N7:0
MASK 0FFFh
Dest. O: 2.0 (This is a 16 bit output card 1746-OW16)
Control R6.0
Length 6
Position 0
When I try to download to the processor I get to following message “Program as error, Cannot Download”. When I change the destination from an output word O: 2.0 to a B3:0 bit it works fine. What am I doing wrong?
Thanks,
Randy
File #N7:0
MASK 0FFFh
Dest. O: 2.0 (This is a 16 bit output card 1746-OW16)
Control R6.0
Length 6
Position 0
When I try to download to the processor I get to following message “Program as error, Cannot Download”. When I change the destination from an output word O: 2.0 to a B3:0 bit it works fine. What am I doing wrong?
Thanks,
Randy