Hey,
I am an electronics tech (not a programmer) for A/B and making some test benches so I can trouble-shoot the boards. I am testing a 1746-NI8 board. The rack is set up as ( 1747-l543 1746-NO4V ((that I will swap out with a NO4I for a current test)) 1746-NI8 then a 1746-ITB16. The ITB16 has 4 switches that I use to apply different counts to the NO4V. I have the NO4V CH0 tied to the NI8 CH0 and CH1, then CH1 on NO4v tied to ch2 and ch3 of the ni8, and so on in that order. I don’t know how to get the NI8 to see what I am putting to it. I need to see the counts on the screen to know what ch on the board is failing.
I will be doing the NI16I and the NI16V after the NI8...
thanks
I am an electronics tech (not a programmer) for A/B and making some test benches so I can trouble-shoot the boards. I am testing a 1746-NI8 board. The rack is set up as ( 1747-l543 1746-NO4V ((that I will swap out with a NO4I for a current test)) 1746-NI8 then a 1746-ITB16. The ITB16 has 4 switches that I use to apply different counts to the NO4V. I have the NO4V CH0 tied to the NI8 CH0 and CH1, then CH1 on NO4v tied to ch2 and ch3 of the ni8, and so on in that order. I don’t know how to get the NI8 to see what I am putting to it. I need to see the counts on the screen to know what ch on the board is failing.
I will be doing the NI16I and the NI16V after the NI8...
thanks