aandjsam
Member
Hi all,
I was hoping someone here may be able to help.
I've got to add a Sick Flexisoft CPU0, with a GENT 00000 Gateway attached, to an existing automation system. The PLC is a Mitsubishi FX5U.
I've tried several approaches, and cannot get the two devices communicating successfully.
Any help would be greatly appreciated.
Thanks in advance!
I was hoping someone here may be able to help.
I've got to add a Sick Flexisoft CPU0, with a GENT 00000 Gateway attached, to an existing automation system. The PLC is a Mitsubishi FX5U.
I've tried several approaches, and cannot get the two devices communicating successfully.
Any help would be greatly appreciated.
Thanks in advance!