Hi,
I have a Siemens 6SE70160TP50 servo in my application current programmed to work only in forward direction. The software being used for updating parameters is DriveMon.
I want to do use one of the Digital inputs(push button momentary) on the drive to run the motor in reverse. I dont know if there is a function/parameter value where I can change the phase(direction of rotation). I cannot program this in the PLC as the PLC is protected. I can upload the program from the PLC with no tags, and few of the parts being locked.
Is there a way I can do this in drive itself?
Thanks!
I have a Siemens 6SE70160TP50 servo in my application current programmed to work only in forward direction. The software being used for updating parameters is DriveMon.
I want to do use one of the Digital inputs(push button momentary) on the drive to run the motor in reverse. I dont know if there is a function/parameter value where I can change the phase(direction of rotation). I cannot program this in the PLC as the PLC is protected. I can upload the program from the PLC with no tags, and few of the parts being locked.
Is there a way I can do this in drive itself?
Thanks!