Hi all used kepware numerous times and never had any big problems until now
Trying to grab some tags of a ET200Sp CPU (1510SP-1PN) programmed via Tia portal v14 SP1
Tried everything at this stage,
Enabled all security featured in PLC and Reset memory card and re downloaded.
Verified the following
Ip's are correct
rack and slot number are correct
DB5,B00.0 is the tag address I am using.
tring to read bool 1 in Datablock 5
datablock is not optimised
seems to get connection (can see plc system tags) but can not read tags
Anyone ever done this ?
anything obvious i'm missing ?
Trying to grab some tags of a ET200Sp CPU (1510SP-1PN) programmed via Tia portal v14 SP1
Tried everything at this stage,
Enabled all security featured in PLC and Reset memory card and re downloaded.
Verified the following
Ip's are correct
rack and slot number are correct
DB5,B00.0 is the tag address I am using.
tring to read bool 1 in Datablock 5
datablock is not optimised
seems to get connection (can see plc system tags) but can not read tags
Anyone ever done this ?
anything obvious i'm missing ?