Siemens CP143 (6GK1143-0AA01)

The_Harlequin

Member
T
Join Date
Feb 2011
Location
Europe
Posts
30
Hello!
Does this module need any supply card for the 15V? 15v fault lit and there is no voltage in the AUI port. I don't find any manual on this card so I hope that someone know this.
 

Similar Topics

C
PCLink2 with Siemens CP143
Hi, I would like to find the procedure to setup PCLink2 (ISA card in PC) to communicate with Siemens CP143. I know that this card is very old...
Replies
6
Views
3,601
umair2282
U
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
9
Views
210
mburtis
M
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
147
bkottaras
B
J
Emergency Stop reset Siemens
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
2
Replies
19
Views
308
John Lee
J
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
116
mk42
M
Back
Top Bottom