Siemens IM153-1 Interface Module

Agusa

Member
A
Join Date
Dec 2021
Location
Hanford
Posts
2
On the Siemens IM153-1 Interface Module, ET200M, what is the difference between the "0 X-18/19/20" and the "1 x-8/9/10? Picture attached of the "0".
Both have the same part number of 153-1AA03-0XB0.

IMG_1203.jpg
 

Similar Topics

K
red line on siemens IM153-2 online
when we go online in the simatic hardware configuration, we have an et200 station IM153-2 redundant, which has a small red line at its top left...
Replies
3
Views
1,979
Kataeb
K
B
Prosoft MVI56 PDPMV1 Profibus DP master and Siemens IM153-2 DP/PA link module
Hi, I have a Prosoft profibus master module (for control logix PLC) and the Siemens IM153-2 DP / PA link module (and the IM157 PA Coupler)...
Replies
0
Views
6,598
Benny123
B
S
RX3i PLC with PBM300 connected to Siemens ET200M(IM153-1)
I would like to connect a profibus master PBM300 (from GE) to a distributed I/O profibus slave ET200M (from Siemens). Do I need to use the ET200S...
Replies
1
Views
5,081
dchartier
D
ckchew666
Siemens Profibus IM153 differences?
Hi guys, Currently we have a project & Siemens supplied us a pair of Profibus module with part number 153-2BA02-0XB0, but the one using at...
Replies
1
Views
4,684
dchartier
D
H
Siemens CPU 317-2DP Firmware Version V2.1.8
Hello, I have a CPU 317-2DP Firmware Version V2.1.8. In TIA Portal only V2.6 is available, and there is no option to upgrade FW. Then I open it...
Replies
2
Views
97
hafizzz_ahmad
H
Back
Top Bottom