Siemens KTP600PN HMI Tags Question

ogie125

Member
ogie125
Join Date
Dec 2002
Posts
9
Hello Everyone,

Apparently I am only limited to use 128 tags for the Siemens KTP6000PN HMI. I hope this is not a silly question, but is there a way to get around this? I need to use and additional 40 tags. Thanks in advance.
 

Similar Topics

W
Convert Codesys code to Siemens tia portal
Hi! What is the way to convert the code from the Codesys code to the Tia Portal? Regards, WK
Replies
0
Views
41
Wak
W
C
What is the Siemens name of their Servo Product Line and what Software is used ?
Good Afternoon , It has been decades since I have done anything with Siemens . What is the Siemens name of their Servo Product Line and what...
Replies
10
Views
205
bkottaras
B
T
Software tools like Siemens PRONETA?
I'm using the Siemens PRONETA software to do some IO testing currently. I love the simplicity and fast testing capability. Does anyone know about...
Replies
0
Views
86
Thijsva05
T
C
Siemens OP7 error $613 DB-error No. 11 (0: 15)
Hi, First time user of S5 Siemens. Is there any solution on how to solve this kind of error. HMI OP7 $613 DB-error No. 11 (0: 15) Siemens PLC...
Replies
9
Views
173
parky
P
B
Simulate Siemens HMI to PLC through NAT connection
Hello, I have an issue where I want to simulate an Siemens HMI panel, through NAT connection to a PLC. I have the possibility through extended...
Replies
8
Views
242
JesperMP
JesperMP
Back
Top Bottom