Siemens OP370 HMI backup

johnmck66

Member
johnmck66
Join Date
Aug 2007
Location
Manchester
Posts
96
I am trying to carry out a software backup of the HMI, WinCC will not allow me to connect giving me "version" and other errors. I was able to backup some MP270's at the same clients via the keypad, and backing up to a memory card. But on the keypad on the MP370 it looks like there may be some protection, as I cannot get to the operating system..any ideas please.
 

Similar Topics

H
Siemens CPU 317-2DP Firmware Version V2.1.8
Hello, I have a CPU 317-2DP Firmware Version V2.1.8. In TIA Portal only V2.6 is available, and there is no option to upgrade FW. Then I open it...
Replies
0
Views
4
hafizzz_ahmad
H
J
Siemens PLC Help
HI everyone, i am new to Siemens plc programming and i am in need of some help. yesterday we had an S7-1200 CPU 1214C fail to turn on an output to...
Replies
7
Views
178
dwoodlock
dwoodlock
Itshouldwork
A way to detect online, hardware and software changes of Siemens TIA Portal V17
Hi PLC people, think about this scenario: The PLC is somehow connected to the same network with the facilities` network. Then someone connects to...
Replies
2
Views
86
mk42
M
M
ISSUES ASSIGNING PROFISAFE ADDRESS TO SIEMENS ET200ECO PN IO MODULE
Hello everyone, I've had this issue for the last 2 days where I try to assign the profisafe address to an IO block (6ES7 146-6FF00-0AB0) but when...
Replies
5
Views
154
baref00t25
B
P
SOFTWARE TIA PORTAL V14 - PLC SIEMENS
Hello, good morning, I have been having two problems with the Tia Portal software. The first is that I have installed it on my computer and...
Replies
5
Views
187
tdoa
T
Back
Top Bottom