Hi,
I'm using some variables of KY data type (two absolute numbers, one byte each, in the range of 0 to 255), if I want to write the two number on the PLC (S5) how do I write them on the WinCC Flex:
ej.: 133/188 or 133,188 or 133 188 or how???
Juan
I'm using some variables of KY data type (two absolute numbers, one byte each, in the range of 0 to 255), if I want to write the two number on the PLC (S5) how do I write them on the WinCC Flex:
ej.: 133/188 or 133,188 or 133 188 or how???
Juan