shaulapto
Member
Hi,
I'm trying to transfer all the blocks from a Siemens S5-115U CPU943 using Step5 programming software.
The S5 is online and also it is possible to see the list of blocks in the PLC (Block Directory in the PLC).
But when I try to transfer blocks from the PLC to a File I receive the following message:
"AS function disabled : function active"
When I try to edit blocks in the PLC I receive the same message.
The CPU has two communication ports and the problem is the same using both of them.
I tried with Step5 V6.6 and also with Step V7.1 but the problem is the same.
It seems to me that the problem is in the PLC,some kind of locking bit/word that disables the transfer or edition of blocks.
Could anybody help me to solve the problem?
Thanks,
Shaul
I'm trying to transfer all the blocks from a Siemens S5-115U CPU943 using Step5 programming software.
The S5 is online and also it is possible to see the list of blocks in the PLC (Block Directory in the PLC).
But when I try to transfer blocks from the PLC to a File I receive the following message:
"AS function disabled : function active"
When I try to edit blocks in the PLC I receive the same message.
The CPU has two communication ports and the problem is the same using both of them.
I tried with Step5 V6.6 and also with Step V7.1 but the problem is the same.
It seems to me that the problem is in the PLC,some kind of locking bit/word that disables the transfer or edition of blocks.
Could anybody help me to solve the problem?
Thanks,
Shaul