Mas01
Member
Context: PLC= S7-1212C, HMI=KTP1200 Basic.
Hi again,
When the "REPORT" button is pressed (on a different screen), it takes the operator to the REPORT page. Works fine.
As it stands, on the REPORT page, the operator then has to press the "Part Number" field to enter the part number (either manually or via a bar-code scanner).
QUESTION: Is it possible, so that when you first enter the REPORT page, the user does not need to press the Part Number field, and can just enter the number/scan in the part number?
i.e. I want to make the Part Number field be the "active field" when you first navigate to the REPORT screen.
Attached is a screenshot of the Properties for the Part Number I/O field, if it helps.
Hope that makes sense. Happy to expand on the above.
Thanks
Hi again,
When the "REPORT" button is pressed (on a different screen), it takes the operator to the REPORT page. Works fine.
As it stands, on the REPORT page, the operator then has to press the "Part Number" field to enter the part number (either manually or via a bar-code scanner).
QUESTION: Is it possible, so that when you first enter the REPORT page, the user does not need to press the Part Number field, and can just enter the number/scan in the part number?
i.e. I want to make the Part Number field be the "active field" when you first navigate to the REPORT screen.
Attached is a screenshot of the Properties for the Part Number I/O field, if it helps.
Hope that makes sense. Happy to expand on the above.
Thanks
Last edited: