prhudson
Guest
P
banghead
I have been trying to get Siemens STEP7 Software Redundancy to work on two S7-416-2DP PLCs. I have tried copying the demo program, SWR_400_MINI, function blocks with a few minor modification for the hardware that is connected to the PLC. I keep getting an "area length" error that stops the PLC.
I printed out the SWR manual that I download from the web and I have read every page. No help there.
I went to the Siemens site and found a FAQ (ID: 2812567) relating to this problem, but nothing I have tried will get past the "area length" error.
Has anyone had any success with Siemens STEP7 Software Redundancy?
I have been trying to get Siemens STEP7 Software Redundancy to work on two S7-416-2DP PLCs. I have tried copying the demo program, SWR_400_MINI, function blocks with a few minor modification for the hardware that is connected to the PLC. I keep getting an "area length" error that stops the PLC.
I printed out the SWR manual that I download from the web and I have read every page. No help there.
I went to the Siemens site and found a FAQ (ID: 2812567) relating to this problem, but nothing I have tried will get past the "area length" error.
Has anyone had any success with Siemens STEP7 Software Redundancy?