Simatic S7 V4.1

[LordError]

We have siemens S7 V4.1 installed in PG, then the hard drive fails after sometimes and eventually we lost our authorization. We ask for another authorization from siemens, its still on the go. Some say that S7 will run even if without authorization. Is it possible that this version of S7 will run even without authorization. I tried to install it to another PC without authorization but a message will appear telling me that it found no authorization then the program quits. I start Simatic S7 over again, still to no avail. How can i run this without authorizaton, please help. Thanks.


LordError

 

[Fritz_frederix]

Hello,

When the program tells you that he didn't found the authorisation, just click OK and it will proceed.
Worked for me.

Rudi

 

[LordError]

I click ok but the program terminates. I restart the program, still it quits after i click ok. Is there anything i did wrong upon installing the ware.

 

[Fritz_frederix]

Try cancel.

 

[LordError]

I also tried clicking cancel. Still nothings happens. The programs still quits. Anyone here who can help me please. Thanks.

 

[RGB]

The ability to run without authorization isn't available until V5.0. The 14 day emergency authorization should still be on the authorization disk, you can use that until your original is recovered.

 

[LordError]

I think the 14 day expired the disk shows no more mercy.
anyway thanks to you there bud for the info.

 

[JesperMP]

The 14 days emergency authorisation doesnt starts its "timer" until it is installed on the HD. Maybe it is still working.

 

[Guest]

Ask you local Siemens person for a copy of Step7 5.2 trial package. Don't install the supplied key then you can use the software without key as long as you don't care for a nag screen to pop up from time to time. It got me by until I could get a replacement key.

Good luck
Runderwood