I have been using a simulation program to provide feed-back to PLC5 programs. The setup requires that I use the actual PLC5 to do the simulation.
I am trying to use SOftLogix5 to do the same thing but I find that SOftLogix ignores the Rack inhibit that works so well in a real PLC5. The whole objective is to beable to read and write to the I/O table of the PLC5 or SoftLogix in my case.
Has anyone have run into this situation and how did you solve the problem?
Thanks,
I am trying to use SOftLogix5 to do the same thing but I find that SOftLogix ignores the Rack inhibit that works so well in a real PLC5. The whole objective is to beable to read and write to the I/O table of the PLC5 or SoftLogix in my case.
Has anyone have run into this situation and how did you solve the problem?
Thanks,