rdj59
Member
I've been racking my brain and trying everything that i could think of but now i think i might be doing the imposible. lol What I'm attempting to do is go from an SLC 5/03 thru phoenix contact 2708203 data fax modems then from the 232 port to a 1761-net-eni. On my test bench i have no problems connecting to a slc 5/03 thru the eni module. I also have no problems connecting to the station via the modem from the plant. When i connect up the eni module to the modem and go thru rslinx all i recognize is the eni module itself and it says its idle. I have the plc at the station setup the same way that worked on my test bench. I am wondering if there is some small setting or something that I'm missing. My grand plan is to get off the messed up dh485 network at the plant and convert the 13 stations to go to ethernet, then to talk to a control logix processor and message from there. Any help would be greatly appreciated.
Thanks,
Jeramie
Thanks,
Jeramie