francevendee
Member
Hi all,
I have been asked to build a panel with 7 Powerflex 4 drives.
AB Panelview 550
SLC 5/05 with digital inputs, outputs and analogue outputs if required.
My question is can the speed of the drives be altered by the PLC any other way than through analogue output cards.
Can it be done through DH485 port?
Any Allen Bradley geniuses that can help before I contact Tech Support and get told I have to use Powerflex 40 with Ethernet card etc?
I have been asked to build a panel with 7 Powerflex 4 drives.
AB Panelview 550
SLC 5/05 with digital inputs, outputs and analogue outputs if required.
My question is can the speed of the drives be altered by the PLC any other way than through analogue output cards.
Can it be done through DH485 port?
Any Allen Bradley geniuses that can help before I contact Tech Support and get told I have to use Powerflex 40 with Ethernet card etc?