Customer has a circa 2004 SLC-500 PLC. Fieldbus is a 1747-SDN DeviceNet scanner. Customer has SLC-500 file (.rss) with no comments. Has no *.dnt file for RSNetWorx.
So is it possible with a recent vintage of RSNetWorx for DeviceNet to connect either via RSLinx through the CPU or via DeviceNet interface, to this fieldbus and extract the network configuration?
Project requires changing a single slave node.
No changing in data but a change in EDS file as old Eurotherm coming out and an HMS Anybus gateway going it's place.
TIA
So is it possible with a recent vintage of RSNetWorx for DeviceNet to connect either via RSLinx through the CPU or via DeviceNet interface, to this fieldbus and extract the network configuration?
Project requires changing a single slave node.
No changing in data but a change in EDS file as old Eurotherm coming out and an HMS Anybus gateway going it's place.
TIA