AutomationTechBrian
Lifetime Supporting Member
The machine manufacturer provided my customer with program files for his SLC 5/03 with extensions .ach, .att, and .adr, but I don't know how to utilize the .att and .adr in Logix 500. I was able to connect to the PLC and upload the program file from the processor, but of course there are no comments on that file. I'm hoping that I'll be able to get the comments in the ladders so troubleshooting is easier.
I did find reference to the files on the internet, but nothing for Logix 500. (see attached)
I did find reference to the files on the internet, but nothing for Logix 500. (see attached)