slc shift registers

[exiled]

hi guys
i'm currently working on a project using a slc 5/03. i want to use the same piece logic 6 times (ie all the timers and counters are the same)but at 6 different output addresses, sometimes in the order of 1-6 or 3-6 ect, allways the lowest to the highest in order. My question is is the shift register BSR the correct command to use or should i be looking elsewhere?

if anybody has any code they would like to share i would be very grateful

many thanks
kev

 

[garryt1]

Hi,
You could use this but you will need to be more specific in what you are trying to acheive.