steve.goldson
Member
Hi,
I am using SoMAchine 4.2 and I am trying to change the IP address in my M258 PLC.
I have tried changing it using "process communication settings", but it just resorts back to 0.0.0.0.
I have tried deleting the config file still no good.
I have even tried re-loading the firmware to the PLC via a USB stick with the IP address in I want.
HELP! Even Schneider seem at a loss why it is not working. I have reasonable PLC knowledge but mainly on Omron. I have very limited experience on schneider.
Thank you in advance
I am using SoMAchine 4.2 and I am trying to change the IP address in my M258 PLC.
I have tried changing it using "process communication settings", but it just resorts back to 0.0.0.0.
I have tried deleting the config file still no good.
I have even tried re-loading the firmware to the PLC via a USB stick with the IP address in I want.
HELP! Even Schneider seem at a loss why it is not working. I have reasonable PLC knowledge but mainly on Omron. I have very limited experience on schneider.
Thank you in advance