Hi all,
Let's say we have a nice real (analog) value that has already been scaled with an SCP in Studio5000.
Is there a slick method to capture/notice when this value has become static (non moving, sensor failure, etc.) without using some Mov instructions to move numbers and timers around.
I want to be able to check on this real value (constantly measuring and changing reported values as it weighs material == it's a scale) say every 60 seconds or so; then, if the value isn't changing (has become static), I can make myself some alarms and so on.
Thanks,
Let's say we have a nice real (analog) value that has already been scaled with an SCP in Studio5000.
Is there a slick method to capture/notice when this value has become static (non moving, sensor failure, etc.) without using some Mov instructions to move numbers and timers around.
I want to be able to check on this real value (constantly measuring and changing reported values as it weighs material == it's a scale) say every 60 seconds or so; then, if the value isn't changing (has become static), I can make myself some alarms and so on.
Thanks,