Step 5

werder85

Member
W
Join Date
Dec 2007
Location
Brasov
Posts
21
I have to do some service works on a process driven by a Simatic S5 PLC.
I've got an old software (Step 5 v7.2) which runs on DOS and which is very difficult to use. Does anyone know where I could find a newer version which runs on Windows, or at least some documentation about Step5?
Thanks a lot!
 
Step 5 V7.2 does run on Windows. I have it running on both Windows 2000 and XP systems. If you're looking for an easier to use software you can take a look at S5 for Windows by IBH Softec.

Kind regards,
 

Similar Topics

A
Single Quote Step 7 Simatic Manager STL/AWL Lenguage
Hello Everyone Im Trying to Study a PLC programm of a Pet Blower machine, it is programmed in Simatic Manager Step 7 in STL/AWL Lenguage in a part...
Replies
0
Views
1
adrirock1141
A
P
Encrypted block protection for FBs and FCs from STEP 7 V5.5
I am having a step7 v5.4 program where the blocks are encrypted and locked. And the manufacturer is stopped the support. Is there any ways to...
Replies
2
Views
235
PazhumaliyilBiju
P
S
Siemens S7-200 / Step-7 Microwin
Good Morning, Hoping someone with some Siemens experience can give me a hand with this one. Customer has a S7-200 cpu, which has a 6GK7...
Replies
0
Views
273
Sickify
S
E
SFC IN STUDIO 5000 name current Step
HI! HOW COULD I OBTAIN THE NAMES OF THE STEPS OF A ROUTINE IN SFC LANGUAGE IN STUDIO5000? Or is there a system variable that gives me those...
Replies
0
Views
364
edgardany2k
E
AutomationTechBrian
Siemens Step 7, Simatic Mgr, Adding a DO16 to an existing ET200M (Profibus)
I'm just trying to figure out the right method of adding a DO card to an existing rack. It's not the *next* open slot, but I have to move the AO...
Replies
5
Views
611
AutomationTechBrian
AutomationTechBrian
Back
Top Bottom