Hello all,
I have a question that hopefully has a yes
I am scanning a bar code and bringing in that string in a DB34.
I am trying to compare that string with already stored strings.
I cal FC10 for this part; however.
The first string is in a DB36.dbb0
The string is 14 characters long.
The next string starts at db36.dbb200. because in this db i have used a UDT for addressing. Is it possible to call this?
I call FC10 and string one is P#DB36.DBX0.0 and string 2 is P#DB36.DBX200.0 and the ret_value I made m155.0 but it only give me an error saying that the address does not fit?
is there a certain way to address this db that has a udt?
I have a question that hopefully has a yes
I am scanning a bar code and bringing in that string in a DB34.
I am trying to compare that string with already stored strings.
I cal FC10 for this part; however.
The first string is in a DB36.dbb0
The string is 14 characters long.
The next string starts at db36.dbb200. because in this db i have used a UDT for addressing. Is it possible to call this?
I call FC10 and string one is P#DB36.DBX0.0 and string 2 is P#DB36.DBX200.0 and the ret_value I made m155.0 but it only give me an error saying that the address does not fit?
is there a certain way to address this db that has a udt?