garagon
Member
Hi everyone,
I would like to know if there are any sample ladder programs to help me with a project to control an X-Y table with stepper motors using a Omron CJ1M CPU 22. The stepper motors have encoders attached to them and are going to be controlled by MCG stepper drives driven by pulses generated from the PLC (hopefully!). Any help will be greatly appreciated. Thanks!
Gary
I would like to know if there are any sample ladder programs to help me with a project to control an X-Y table with stepper motors using a Omron CJ1M CPU 22. The stepper motors have encoders attached to them and are going to be controlled by MCG stepper drives driven by pulses generated from the PLC (hopefully!). Any help will be greatly appreciated. Thanks!
Gary