Hey everyone. I am trying to connect my Plant Switch (Stratix 8300) to the Business Core Switch. I am not an IT professional, so I am trying my best by reading manuals and doing Google searches. My IT dept does not support non-Cisco switches (yes I know it has Cisco internals), so I'm pretty much on my own. My problem is I am not able to Ping the Stratix 8300.
Below is my Network Diagram. Attached are screen shots of the Web Setup.
10.205.172.0/24 is my subnet.
10.205.172.2/24 = Stratix 8300
10.205.172.3-254/24 = Devices
Gi1/1 is connected to IDF Switch.
Here's what IT has done:
Create VLAN 205 on IDF switch (Now VLAN205 has been created on 10.200.171.121 and 10.200.172.10)
Change the VLAN of FA0/29 interface on IDF switch to VLAN205
Create sub-interface on the MPLS router for VLAN205
Create VLAN 205 on Core switch (10.200.172.10)
Am I doing something wrong on the Routing Page? Do I need to put the Core Switch IP address in the Gateway? Do I need to add Static Routes?
Below is my Network Diagram. Attached are screen shots of the Web Setup.
10.205.172.0/24 is my subnet.
10.205.172.2/24 = Stratix 8300
10.205.172.3-254/24 = Devices
Gi1/1 is connected to IDF Switch.
Here's what IT has done:
Create VLAN 205 on IDF switch (Now VLAN205 has been created on 10.200.171.121 and 10.200.172.10)
Change the VLAN of FA0/29 interface on IDF switch to VLAN205
Create sub-interface on the MPLS router for VLAN205
Create VLAN 205 on Core switch (10.200.172.10)
Am I doing something wrong on the Routing Page? Do I need to put the Core Switch IP address in the Gateway? Do I need to add Static Routes?