dmcguire
Member
I need some help with some programming or maybe just another way of looking at attacking this problem. I'm using a Direct Logic D0-06DR for starters. The andon project I'm working on will control lights/audio signals and an LED message board. No problem with the light/audio or even the message board for that matter. The problem is that I have 13 stations (8 have 2 buttons) (5 have 1) wich each button will send a different message to the LED board "station 1 off" "station 1 assistance" and so on. That's a ton of combinations if I have to use all the open/closed contact combinations. (side note: I have to use one shots to "PRINT" the message to the board because it needs to reset each time it gets a message) Any suggestions on what to try or maybe a differet way to go?