JeremyM
Lifetime Supporting Member
There's a reset button behind the SD slot you can hold for some period that does a "Stage 2" reset to factory firmware.
Studio v36 news / rumors?
- Thread starter tlf30
- Start date
tlf30
Lifetime Supporting Member
OP
OK, flashing direct on the controller's ethernet port and not across the backplane got v35 back on it.
Flashing v36 directly on the controller's ethernet port did work.
The lesson here is, DO NOT try to flash v36 across the backplane.
Flashing v36 directly on the controller's ethernet port did work.
The lesson here is, DO NOT try to flash v36 across the backplane.
Similar Topics
Does anyone know about the timeline for ACM support for the Library Designer in v36?
Just wondering since the most recent version of ACM seems...
Just a small rant incase nobody downloaded or noticed yet.... but working on a new project in the latest version so I could test out FT Echo...
Studio 5000 logix emulator V31 installer anyone have this?
I recently did a program conversion from logix 500 to studio 5000 and when machine runs it depends on two ton instructions to keep the machine in...
Morning,
we are changing how we control an HMI by having our users sign into iFix which then sends a tag to the HMI. Looking at a specific DINT...