Supervised output module, single channel

jdbrandt

Lifetime Supporting Member
J
Join Date
Oct 2002
Location
Pennsylvania
Posts
1,203
Does anyone know of a maker of a 'GENIUS-like' module that can supervise a wire with a small amount of voltage, measure the current, and produce a signal that indicates "the device attached is presently NOT shorted to ground, and will properly energize when full voltage is applied". General Electric does this with some of their GENIUS blocks, and I desire to do the same, but for only ONE device. If this were an imput, it would be called 'supervised', as used on fire-alarm systems. I don't know what they call them when they're on outputs.
Any help appreciated.
 

Similar Topics

J
GENIUS-like output device / supervised
Does anyone here know of a small (micro) or slot based PLC that has modules that support a supervised output. This would be an output that can...
Replies
3
Views
1,908
jdbrandt
J
J
Pulsed output
Hi There, I have a filler with a coriolis flowmeter that has died. the filler requires a pulsed output (manufacturer wont edit the program) is...
Replies
13
Views
290
dwoodlock
dwoodlock
S
CTEU-EP No Output
Hey all, I am starting a new project for a customer and I am adding in solenoid valves. Once added, I noticed there was a lack of an Output...
Replies
0
Views
95
Stonewall
S
L
Read pulses from a magnetic-inductive flow meter and modify pulses by a user inputted valve and to output the modified rate to another pulse reader
Hi, The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001. I will set the flow meter...
Replies
4
Views
214
Steve Bailey
Steve Bailey
B
AB 5069-OBV8S Safety Output Relay
Hi, I am using AB 5069-L306ERS2 CPU. My system should achieve SIL-2. I have safety door switches connected to AB 5069-IB8S module, and I want to...
Replies
1
Views
132
ASF
A
Back
Top Bottom