manmeetvirdi
Member
Hi There
We Have Got Two Drives(100 Mtrs Apart ) Running The Same Chain(convayor).both Of Drives Have Diffrent Gear Ratio.we Are Using Mitsubishi Fr-a 500 Series Inverters Each For These Drives.now How To Synchronize Them,both Are Needed To Start Simultaneously.
One Thing We Have Already Done Is That We Have Linked The Two Drives In Master -slave Mode.master Is Giving The 0-10vdc Signal Corresponding To The Frequency Set By Port Connected To It ,to Slave Inverter.
But We Know That There Is Frequency Offset Between These Drives(due To Diffrence In Gear Ratio) ,now How To Eliminate This Particular Problem Of Offset.
Any Sugestions??
Regards,
Manmeet Singh Virdi
We Have Got Two Drives(100 Mtrs Apart ) Running The Same Chain(convayor).both Of Drives Have Diffrent Gear Ratio.we Are Using Mitsubishi Fr-a 500 Series Inverters Each For These Drives.now How To Synchronize Them,both Are Needed To Start Simultaneously.
One Thing We Have Already Done Is That We Have Linked The Two Drives In Master -slave Mode.master Is Giving The 0-10vdc Signal Corresponding To The Frequency Set By Port Connected To It ,to Slave Inverter.
But We Know That There Is Frequency Offset Between These Drives(due To Diffrence In Gear Ratio) ,now How To Eliminate This Particular Problem Of Offset.
Any Sugestions??
Regards,
Manmeet Singh Virdi