ric.de.abreu
Member
Hi guys
i'm facing a big trouble here.
I'm a intern here and there is no one here to help or guide me in this project.
i just need to build a temperature control and data logger with AB Micrologix 1100.
I have no idea from how to start as i'm just learning Ladder (alone), so I really need a BIG help here.
Hardware:
Micrologix 1100
1762-IF4 (will buy)
1762-IQ16 (have but not use)
1762-IQ8W6 (have but not use)
Project Scope:
there are 4 measurements points. 3 outside 1 inside, all taken by PT-100 (4-20 ma)
we just need to log the inside measurement point.
the 3 external points are just for controlling the heating (it can not go too fast, nor the temperature be above a limit).
we will use Advanced HMI for the communication and logging no OPC Server will be used in this project. The Advanced HMI is fine and just needs the PLC part to make all work.
PLEASE, I really need all help i can get in this project.
i'm facing a big trouble here.
I'm a intern here and there is no one here to help or guide me in this project.
i just need to build a temperature control and data logger with AB Micrologix 1100.
I have no idea from how to start as i'm just learning Ladder (alone), so I really need a BIG help here.
Hardware:
Micrologix 1100
1762-IF4 (will buy)
1762-IQ16 (have but not use)
1762-IQ8W6 (have but not use)
Project Scope:
there are 4 measurements points. 3 outside 1 inside, all taken by PT-100 (4-20 ma)
we just need to log the inside measurement point.
the 3 external points are just for controlling the heating (it can not go too fast, nor the temperature be above a limit).
we will use Advanced HMI for the communication and logging no OPC Server will be used in this project. The Advanced HMI is fine and just needs the PLC part to make all work.
PLEASE, I really need all help i can get in this project.