abouamsoura
Member
I have here Diesel engine Caterpillar D399 and they are using
- Datcon Gauge Sender oil Pressure P/N 102227
- Maxima Gauge Sender Temp. P/N 02023-00
I want to connect the signal from each sender to a PLC input.(one wire coming from each sender)
what type of PLC card I should use (analogue input, Temperture input RTD)?
FYI,i am using Modicon M340.
- Datcon Gauge Sender oil Pressure P/N 102227
- Maxima Gauge Sender Temp. P/N 02023-00
I want to connect the signal from each sender to a PLC input.(one wire coming from each sender)
what type of PLC card I should use (analogue input, Temperture input RTD)?
FYI,i am using Modicon M340.