I dont know what your labels refer to. So I can only guess as to what the trace shows.
I also do not understand how it seems in the trace that several bits change at the same time. The idea of a gray code is that only 1 bit is flipped at one time.
Is this trace before or after conversion from gray code to binary ?
Can the encoder be setup to not using gray code ?
I would like to see the whole raw (no conversion) bitpattern i.e:
0011 0001 0010 1101 1111 0111 1010 1101 0010
0011 0001 0010 1101 1111 0111 1010 1101 0011
0011 0001 0010 1101 1111 0111 1010 1101 0111
0011 0001 0010 1101 1111 0111 1010 1101 0110
I also do not understand how it seems in the trace that several bits change at the same time. The idea of a gray code is that only 1 bit is flipped at one time.
Is this trace before or after conversion from gray code to binary ?
Can the encoder be setup to not using gray code ?
I would like to see the whole raw (no conversion) bitpattern i.e:
0011 0001 0010 1101 1111 0111 1010 1101 0010
0011 0001 0010 1101 1111 0111 1010 1101 0011
0011 0001 0010 1101 1111 0111 1010 1101 0111
0011 0001 0010 1101 1111 0111 1010 1101 0110
Last edited: