kobelu_090
Member
Hi guys ,
Since I'm not very familiar with the Siemens PLCs safety system I got a couple of questions which you could help me with:
Currently my engineering laptop has installed TIA Portal V13 SP1 .
When I go to the hardware catalog the only safety devices that I can find are :S7-300/400/1200/1500 F CPUs and the ET200S-Failsafe/ET200SP-Failsafe CPUs.
What I can't see are the F-DI/F-DO modules!
I know that on top of the existing software package(TIA Portal v13 SP1) I have to install the Step7 Safety Advanced v13 for programming the safety CPUs. Will this additional software enable the F-DI/F-DO modules in the hardware catalog as well?
Best regards
kobelu_090
Since I'm not very familiar with the Siemens PLCs safety system I got a couple of questions which you could help me with:
Currently my engineering laptop has installed TIA Portal V13 SP1 .
When I go to the hardware catalog the only safety devices that I can find are :S7-300/400/1200/1500 F CPUs and the ET200S-Failsafe/ET200SP-Failsafe CPUs.
What I can't see are the F-DI/F-DO modules!
I know that on top of the existing software package(TIA Portal v13 SP1) I have to install the Step7 Safety Advanced v13 for programming the safety CPUs. Will this additional software enable the F-DI/F-DO modules in the hardware catalog as well?
Best regards
kobelu_090