georgeofthejungle02
Member
- Join Date
- Mar 2004
- Posts
- 60
I am just curious as to who else run into this little annoying problem.
In process control, we use timers all the time ie, adjusting filtration cycle timers etc., and the preset and accumulated value needs to be adjusted in either seconds, minutes or hours
Using panelview plus HMI, the timer preset in the logix 5000 are all in milliseconds, and I have to manually convert the hours, minutes and seconds to millisecs. I am wondering if anyone else runs into this problem. Why can't there be a built in time base convertor that automatically adjust the entered hours or minutes to millisec?
Thanks for listening,
George
In process control, we use timers all the time ie, adjusting filtration cycle timers etc., and the preset and accumulated value needs to be adjusted in either seconds, minutes or hours
Using panelview plus HMI, the timer preset in the logix 5000 are all in milliseconds, and I have to manually convert the hours, minutes and seconds to millisecs. I am wondering if anyone else runs into this problem. Why can't there be a built in time base convertor that automatically adjust the entered hours or minutes to millisec?
Thanks for listening,
George